Shenzhen Lesterlighting Technology Co., Ltd.
Main products:EL Car Sticker
Contact Us
  • Contact Person : Ms. Huang Violla
  • Company Name : Shenzhen Lesterlighting Technology Co., Ltd.
  • Tel : 86-755-83153678
  • Fax : 86-755-29482943
  • Address : Guangdong,Shenzhen,(office) 5/F, No.1 Building, Fuhua New Village, Futian Dist.
  • Country/Region : China

Touch Panel Color Temperature Controller

Touch Panel Color Temperature Controller
Product Detailed
1, glass panel design 2, level 256 3, appearance beautiful, vogue 4, Short press switch function


Touch panel controller is our new research and development of new high-end controller, the glass panel design, appearance beautiful, vogue. Adopting high precision capacitance touch control chip, increased the touch sensitivity, reduces by mistake triggered. It is used for control of the led lighting lamps and lanterns, for example: point light source, soft article light, wash wall lamp, glass curtain wall lamp, etc.; Has the wiring convenient, use the advantages of simple; Can be realized cold light , warm light, such as white light effect change.

Technical Parameters

 working temperature: -20-60 °C

 supply voltage: DC12~24

 output: 3 channels

 connection mode: common anode

 external dimension: L86 Χ W86Χ H36mm

 packing size: L90 Χ W90 Χ H45 mm

 net weight: 125g

 gross weight: 150g

 static power: <1W

 output current: <4A( each channel )

 output power: 12V<96W,24V<192W

Controller External Dimension:


Interface Specification:


Controller instruction:

Touch panel have 2 buttons and a pulley, the keys function as follows:

 :Any state that can be opened or closed the controller outputs;

: the color change button,there are 7 modes of change for you to choose;

:Multicolor pulley touch key, static mode choose key, more than 64 touch points.


                     The button has two functions:


                      Pulley static color choice key, so when the current control mode is M key mode


(color), if must realize pulley static color, can press this key.


                      Pulley color switch key, can change from 64 kinds of static colors (as the pulley




Changes of M key as below:

Mode number




warm white


warm white +20% Cold White


warm white +40% Cold White


warm white +60% Cold White


warm white +80% Cold White




Cold White +80% warm white


Cold White +60% warm white


Cold White +40% warm white


Cold White +20% warm white


Cold White


Typical Application


Installation Method

1, open the touch panel

(1) as shown in figure, use screwdriver in touch panel gently pry gaps, Take the panel;


(2) as shown in figure: the flat cable taken down. Open the lock connection seat, take the flat cable

2, wiring

In the Typical Application. Reference typical application circuit.

3, installation switch base

As shown in figure, connected line will touch installed on the wall in the cassette controller, Screw in screw, make fixed in the wall, will be installed base to the wall.



4, cover touch panel


According to step up good row line, lock flat cable lock, cover panel.




1, Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;


2, Power supply voltage range is DC12~24V, more than voltage range maybe will burnout the controller.



Touch Panel Color Temperature Controller

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.